Comb-drive actuators for large displacements

The design, fabrication and experimental results of lateral-comb-drive actuators for large displacements at low driving voltages is presented. A comparison of several suspension designs is given, and the lateral large deflection behaviour of clamped - clamped beams and a folded flexure design is modelled. An expression for the axial spring constant of folded flexure designs including bending effects from lateral displacements, which reduce the axial stiffness, is also derived. The maximum deflection that can be obtained by comb-drive actuators is bounded by electromechanical side instability. Expressions for the side-instability voltage and the resulting displacement at side instability are given. The electromechanical behaviour around the resonance frequency is described by an equivalent electric circuit. Devices are fabricated by polysilicon surface micromachining techniques using a one-mask fabrication process. Static and dynamic properties are determined experimentally and are compared with theory. Static properties are determined by displacement-to-voltage, capacitance-to-voltage and pull-in voltage measurements. Using a one-port approach, dynamic properties are extracted from measured admittance plots. Typical actuator characteristics are deflections of about at driving voltages around 20 V, a resonance frequency around 1.6 kHz and a quality factor of approximately 3

Market Sampling of Landings of Commercial Fish Species in the Netherlands in 2002

This report contains information on the biological sampling for the market sampling program: which species are sampled, how they were caught, when and where the samples are taken (date and position), how many fish have been measured, how many fish have been aged, etc. The report gives an overview of all the biological sampling activities in 2002 by RIVO on the landings of the commercial important species of herring, mackerel, horse mackerel, blue whiting, greater argentine, sole, plaice, turbot, brill, dab, lemon sole, cod, whiting, Norway lobster and four different species of rays from all ICES areas. This biological sampling took place on landings by both the Dutch fleet as well as foreign fleets landing in the Netherlands. In addition this report contains information on the biological samples collected during research vessel surveys and discard trips both on commercial and non-commercial species

Metro-Line Crossing Minimization: Hardness, Approximations, and Tractable Cases

Crossing minimization is one of the central problems in graph drawing. Recently, there has been an increased interest in the problem of minimizing crossings between paths in drawings of graphs. This is the metro-line crossing minimization problem (MLCM): Given an embedded graph and a set L of simple paths, called lines, order the lines on each edge so that the total number of crossings is minimized. So far, the complexity of MLCM has been an open problem. In contrast, the problem variant in which line ends must be placed in outermost position on their edges (MLCM-P) is known to be NP-hard. Our main results answer two open questions: (i) We show that MLCM is NP-hard. (ii) We give an $O(\sqrt{\log |L|})$-approximation algorithm for MLCM-P

Prevention of acute kidney injury and protection of renal function in the intensive care unit : update 2017

Background: Acute kidney injury (AKI) in the intensive care unit is associated with significant mortality and morbidity. Objectives: To determine and update previous recommendations for the prevention of AKI, specifically the role of fluids, diuretics, inotropes, vasopressors/vasodilators, hormonal and nutritional interventions, sedatives, statins, remote ischaemic preconditioning and care bundles. Method: A systematic search of the literature was performed for studies published between 1966 and March 2017 using these potential protective strategies in adult patients at risk of AKI. The following clinical conditions were considered: major surgery, critical illness, sepsis, shock, exposure to potentially nephrotoxic drugs and radiocontrast. Clinical endpoints included incidence or grade of AKI, the need for renal replacement therapy and mortality. Studies were graded according to the international GRADE system. Results: We formulated 12 recommendations, 13 suggestions and seven best practice statements. The few strong recommendations with high-level evidence are mostly against the intervention in question (starches, low-dose dopamine, statins in cardiac surgery). Strong recommendations with lower-level evidence include controlled fluid resuscitation with crystalloids, avoiding fluid overload, titration of norepinephrine to a target MAP of 65-70 mmHg (unless chronic hypertension) and not using diuretics or levosimendan for kidney protection solely. Conclusion: The results of recent randomised controlled trials have allowed the formulation of new recommendations and/or increase the strength of previous recommendations. On the other hand, in many domains the available evidence remains insufficient, resulting from the limited quality of the clinical trials and the poor reporting of kidney outcomes

Northern Hemisphere Glaciation during the Globally Warm Early Late Pliocene

The early Late Pliocene (3.6 to ~3.0 million years ago) is the last extended interval in Earth's history when atmospheric CO2 concentrations were comparable to today's and global climate was warmer. Yet a severe global glaciation during marine isotope stage (MIS) M2 interrupted this phase of global warmth ~3.30 million years ago, and is seen as a premature attempt of the climate system to establish an ice-age world. Here we propose a conceptual model for the glaciation and deglaciation of MIS M2 based on geochemical and palynological records from five marine sediment cores along a Caribbean to eastern North Atlantic transect. Our records show that increased Pacific-to-Atlantic flow via the Central American Seaway weakened the North Atlantic Current and attendant northward heat transport prior to MIS M2. The consequent cooling of the northern high latitude oceans permitted expansion of the continental ice sheets during MIS M2, despite near-modern atmospheric CO2 concentrations. Sea level drop during this glaciation halted the inflow of Pacific water to the Atlantic via the Central American Seaway, allowing the build-up of a Caribbean Warm Pool. Once this warm pool was large enough, the Gulf Stream–North Atlantic Current system was reinvigorated, leading to significant northward heat transport that terminated the glaciation. Before and after MIS M2, heat transport via the North Atlantic Current was crucial in maintaining warm climates comparable to those predicted for the end of this century

Detecting alcohol vapors using two-dimensional copper-based Ruddlesden-Popper perovskites

The detection of alcohol vapors has many important applications, such as measuring the breath ethanol content to prevent drug-impaired driving. A medical application is the detection of 1-propanol because this compound was found to be a potential marker for lung cancer screening. This work reports an alcohol sensor using the two-dimensional Ruddlesden-Popper perovskite bis(phenethylammonium) tetrachlorocuprate-(PEA)(2)CuCl4, also known as phenethylammonium copper chloride-as the sensing material. The device is based on a change in conductance upon exposure to alcohol vapors. A comparison between pristine (PEA)(2)CuCl4 and (PEA)(2)CuCl4 after a treatment with ultraviolet light shows that the latter has a higher conductance. Devices made with this UV-converted material show a strong response to 1-propanol vapors, starting from a concentration around 2000 parts per million (ppm). Additionally, these devices demonstrate stable behavior in a nitrogen atmosphere. During the stabilization of the 1-propanol flow rate, the concentration fluctuates. These fluctuations were detected by monitoring the current of the device over time, down to steps in 100ppm around a concentration of 8000ppm. The conductance of the devices decreases in contact with air. However, this process can be reversed by additional ultraviolet illumination, thereby making the devices reusable